| CF/AB Model Dryer Specifications | ||
| Model |
CF/AB-190 | CF/AB-270 |
| Grain Column Length | 10 FT | 12 FT |
| Dimensions |
||
| Transport Length | 18 FT 7.5 IN | 21 FT 2 IN |
| Transport Width | 8 FT | 8 FT |
| Transport Height | 11 FT 11 IN | 13 FT 5 IN |
| Installed Length | 17 FT 6IN | 20 FT |
| Installed Width | 8 FT | 8 FT |
| Installed Height | 11 FT 8 IN | 13 FT 2 IN |
| Fan(s) | 28 IN 10 - 13 HP 3500 RPM |
36 IN 10 - 16 HP 1750 RPM |
| Heater(s) BTU/HR(MM) | 3 | 4.6 |
| Augers |
||
| Top Auger (HP/BPH) | 2 HP/925 | 2 HP/1150 |
| Bottom Auger (HP/BPH) | 1.5 HP/680 | 2 HP/815 |
| Metering Roll Drive |
1/3 HP DC SCR | 1/3 HP DC SCR |
| Electrical Load (MRA) |
Excludes auxillary load and unload equipment amps | |
| Single Phase 230 Volt | 77 | 96 |
| Three Phase 230 Volt | 44 | 52 |
| Three Phase 460 Volt | 22 | 26 |
| Drying Capacity (BPH) |
||
| Dry & Cool 25% to 15% | 150 | 205 |
| Dry & Cool 20% to 15% | 202 | 275 |
| Full Heat 25% to 15% | 240 | 335 |
| Full Heat 20% to 15% | 375 | 520 |
| Holding Capacity |
190 | 270 |
Capacities listed are wet bushels, shelled corn at listed input moisture content and are estimates based on drying principles, field results and computer simulation. Variance may occur due to grain's physiological factors (kernel size, chemical composition, variety, maturity), excessive fines, adverse weather conditions, ect.
Full heat capacities discharge at 17% content resulting in 15% final content after cooling.